Note: The answer is for reference only, you need to understand all question.

QUESTION 1
After your Widow Server 2008 has been installed on a server system, you can join the server to an Active Directory domain to be made a member server, or the system can remain as a standalone server.
Then which two of the following descriptions are correct regarding a member server?

A.
A member server allows a server to be centrally administered with common Active Directory administrator credentials.

B.
A member server can participate in Active Directory as any other Active Directory server that might be patched, monitored, or centrally managed.

C.
A member server will be managed and administrated individually, just like any other nondomain attached servers.

D.
A member server is not joined to a domain, and therefore the credentials for the server are based on the local administrator rights to the server itself. For organizations that place a Hyper-V server in their demilitarized zone (DMZ) to host several edge server system, for security purposes the Hyper-V host may likely not be attached to a domain.



Answer: AB


QUESTION 2
When installing Windows 2008, you must install a configure a network protocol that will allow to communicate with other machines on the network. Currently, the most commonly used protocol is called TCP/IP version 4, which stands for Transmission Control Protocol/Interne Protocol. This protocol allows computers throughout the Internet to communicate. After you install TCP/IP, you need to configure an IP address for the server, which three of the following you can choose to assign an IP address?

A.
Automatic Private IP Addressing (APIPA)

B.
Dynamic IP address

C.
Static IP address

D.
Classless IP addressing



Answer: ABC


QUESTION 3
Which of the following settings you can modify in the Hyper-V Settings page? (Select all that apply)

A.
Virtual Hard Disk

B.
Virtual Machines

C.
Keyboard

D.
Release Key

E.
Delete Saved Credentials

F.
Reset Checkboxes



Answer: ABCDEF


QUESTION 4
The Preferences control allows the administrator to adjust the dependency services. For example, in Hyper-V, some of the corresponding services used for Hyper-V that may be displayed in the System Services section include the following: (Select all that apply)

A.
Virtual Machine Management

B.
Microsoft Hyper-V Networking Management

C.
Microsoft Hyper-V Image Management Service

D.
Microsoft System Center Operations Management



Answer: ABC


QUESTION 5
The Diagnostics page in Server Management consolidates three different consoles into a convenient location.
What are the three consoles?

A.
Task Manager

B.
Event Viewer

C.
Device Manager

D.
Reliability and Performance



Answer: BCD


QUESTION 6
You work as the network administrator at ESL.com. Recently, you plan to purchase of a new server for the network with the following hardware configuration:

Server 4 GB of RAM
Two SATA hard disks
One single port network card
Dual-core 32 -bit processor

In such case, you need to ensure that you can install the Hyper-V server role by modifying the hardware configuration.
Then which of the following hardware components should you replace?

A.
memory

B.
processor

C.
hard disks

D.
network card



Answer: B


QUESTION 7
You work as the network administrator at ESL.com, the following table shows the four servers in the company's network:




Now you are required to install Windows Server 2008 and enable the Hyper-V server role on one of the servers in your network. So which server should you use?

A.
CMServerA

B.
CMServerB

C.
CMServerC

D.
CMServerD



Answer: A


QUESTION 8
The last snap-in in the Configuration container of the Server Manager is the WMI Control tool. This is a new tool that allows administrators to maintain the Windows Management Instrumentation (WMI) configuration on the server. With this tool, which three of the following tasks that an administrator can accomplish? (Select all that apply)

A.
Back up the WMI repository

B.
Open the Server Management console

C.
Manage access to the WMI via the Security tab

D.
Change the default scripting namespace (root\cimv2)



Answer: ACD


QUESTION 9
You work as the network administrator at ESL, Ltd. The company has two servers that run Windows Server 2008. The servers have installed the Hyper-V server role and are configured as shown in the following table.




Base on the configuration, you successfully run the Failover Clustering validation Wizard and create a new failover cluster. One of the host servers, you create a new virtual machine and you try to make the virtual machine highly available and receive an error message stating that the disk path is either unavailable, inaccessible, or cannot be managed by the cluster. Now you need to ensure that the virtual machine is highly available. So what action should you perform first?

A.
you need to move the virtual machine XML configuration file to volume E.

B.
you need to replace the fiber channel connection for volume E with an iSCSI connection.

C.
you need to add and configure a second physical disk on each server, and then store the virtual machine on the
address disk.

D.
you need to add and configure a second fiber channel connection to a second SAN disk on each server, and then store virtual machine on the added disk.



Answer: D


QUESTION 10
You work as the network administrator at ESL.com. You have the Hyper-V server role installed on a Windows Server 2008 server. Currently, you attempt to restart the server but find that the Hyper-V Virtual Mat=chine Management service has failed to start. So you restart the server again and enable the required BIOS settings for Hyper-V. Then you try to restart with third time, but unfortunately, the Hyper-V Virtual Machine Management service still fails to start. In such cases, you must find a solution to ensure that the Hyper-V Virtual Machine Management service starts on the server. What action should you perform?

A.
You need to run the ocsetup Microsoft-Hyper-V command and restart the server.

B.
You need to shut down the server, turn off the power, and then turn on the server.

C.
You need to run the oclist | findstr /I Microsoft-Hyper-V command and restart the server.

D.
You need to open the Services console and modify the Log on as setting for the Hyper-V Virtual Management service. Start the service.



Answer: B


QUESTION 11
What are the benefits of Capacity Analysis and Performance Optimization? (Select all that apply)

A.
Capacity analysis helps define and gauge overall system health by establishing baseline performance values, and then analysis provides valuable insight into where the system is heading.

B.
Continuous performance monitoring and optimization will ensure system are stable and perform well, reducing support calls from end users, which, in turn, reduces costs to the organization and helps employees be more productive.

C.
Capacity analysis can be used to uncover both current and potential bottlenecks and can also reveal how charging management activities can affect performance today and tomorrow.

D.
Capacity analysis can be applied to small environments and scale well into enterprise-level systems.



Answer: ABCD


QUESTION 12
You are the senior desktop administrator for ESL.com. The company requires you to enable the Hyper-V serve role on a Server Core installation of Windows server Server2008. Then which command should you run?

A.
winrm quickconfig

B.
cscript scregedit.wsf /AR 0

C.
start /w ocsetup Microsoft-Hyper-V

D.
start /w servermaangementcmd Cinstall Microsoft-Hyper-V



Answer: C


QUESTION 13
You work as the network administrator at ESL.com. You have the Hyper-V server role installed on a server that runs Windows Server 2008. The following exhibit shows the configuration of disk:




Based on the configuration, try to create a pass-through disk from Hyper-V Manager, while you discover that the physical hard disk option is unavailable. In such case, you must ensure that you can add a pass-through disk to a virtual machine. Then what action should you perform to achieve the goal?

A.
You need to mark Disk 1 an offline

B.
You need to create a Volume mount point on drive C.

C.
You need to add a additional hard disk drive to the server.

D.
You need to create a new simple volume on Disk 1 format the volume.



Answer: A


QUESTION 14
Every Windows 2008 server has a common set of resources that can affect performance, reliability, stability, and availability. For this reason, it??s important that you monitor this common set of resources, then what are included in this common set of resources? (Select all that apply)

A.
CPU

B.
disk

C.
memory

D.
network utilization.



Answer: ABCD


QUESTION 15
You work as the network administrator at ESL.com. You are assigned a server that runs Windows Server 2008, and you have installed the Hyper-V server role on the server
which hosts three virtual machines named VM1, VM2, and VM3. Also, you have enabled integration Services on all virtual machines. Now, you must ensure that VM1 starts before VM2 and VM3 when you restart the Hyper-V server. Then which settings should you modify?

A.
Hyper-V Settings

B.
Integration Services

C.
Automatic Stop action

D.
Automatic Start action



Answer: D


QUESTION 16
What is Virtual Machine 2008?

Answer: Microsoft System Center VMM is a server application that administrators can use to manage a large number of VMs across the virtual infrastructure.


QUESTION 17
You work as the network administrator at ESL. To response the company's demand, you create two virtual machines named VM1 and VM2. Now, you must ensure that VM2 has a dedicated amount of total system resource available on the host machine at all times. What action should you perform to meet the requirement?

A.
You need to configure the relative weight settings for VM1

B.
You need to configure the virtual machine limit settings for VM1

C.
You need to configure the virtual machine reserve settings for VM2

D.
You need to configure the limit processor functionality settings for VM2



Answer: C


QUESTION 18
You work as the network administrator at ESL. You have a server named Server1. Server 1 runs Windows Server 2008 and has installed the Hyper-V role. To response the company's demand, you create a virtual machine named VM1 that runs Windows NT Server 4.0 and uses a dynamically expanding disk. But you discover the applications on VM1 fail or freeze. In such case, you must ensure that applications run successfully on VM1. Then what action should you perform?

A.
You need to add a legacy network adapter

B.
You need to enable the Limit processor functionality setting

C.
You need to covert the dynamically expanding disk to a fixed disk

D.
You need to run setup.exe from the integration Services setup disk



Answer: B


QUESTION 19
VMM is a series of components that include Windows Server, SQL Server, a local agent, an Administrative console, and a self-service console

A.
True

B.
False



Answer: A


QUESTION 20
You work as the network administrator at ESL.com. Currently, you need to test an application on a virtual machine that runs Windows Vista Service Pack1(SP1) , and you want to run multiple tests within the application. Each test will modify the settings of the application. Base on the current status, you install the application and maintain the default settings and take a snapshot. Now, you must use the default application settings to start each test. Then what should you do after completing each test?

A.
You need to reset the virtual machine

B.
You need to revert the virtual machine

C.
You need to restart the virtual machine

D.
You need to turn off and then turn on the virtual machine



Answer: B


QUESTION 21
You work as the network administrator at ESL. The company's network consists of a server that runs Microsoft System Center Virtual Machine Manager (SCVMM) 2008. The company requires you to enable the Performance and Resource Optimization (PRO) feature on the SCVMM server. Then what action should you perform first to meet the requirement?

A.
You need to install the Failover Clustering feature

B.
You need to uninstall the Web Server (IIS) server role

C.
You need to deploy Microsoft Systems Centre Operations Manager (SCOM) 2007

D.
You need to deploy Microsoft System Centre Configuration Manager (SCCM) 2007



Answer: C


QUESTION 22
The VMM Administrative console is the main console with which VMM administrators and delegated administrators manage the virtual infrastructure components. Which of the following are included? (Select all that apply)

A.
Physical servers

B.
Virtual servers

C.
The VMM library

D.
Virtual networks (VLANs)



Answer: ABCD


QUESTION 23
You work as the network administrator at ESL. You test a new application by using a virtual machine, while you never perform any modifications on the virtual machines management settings. Currently, you create a snapshot of the virtual machine and begin to run several tests. In such case, you have to restart the host computer during the tests. The test must resume automatically. What action should you perform to achieve the goal?

A.
You need to restart the host server

B.
You need to save the virtual machine and then restart the host server

C.
You need to shutdown the virtual machine and then restart the host server

D.
You need to apply the snapshot of the virtual machine and then restart the host server



Answer: A


QUESTION 24
You work as the network administrator at ESL, Ltd. The company's network consists of a server. The server runs Windows Server 2008 and has installed the Hyper-V server role. The server takes the function of host for a number of virtual machines. And the following table shows the current state of the virtual machines.




Currently, you try to start VM3 but receive an error message stating that there are not enough available resources to start the virtual machine. In such case, you must ensure that you can successfully start VM3. Than what action should you perform?

A.
Save VM2

B.
Reset VM4

C.
Pause VM5

D.
Delete the saved state on VM1



Answer: A


QUESTION 25
The Administrator console is a Microsoft Management Console (MMC) that provides an administrative interface to the VMM 2008 server. VMM administrators can manage all VMs and the VMM organizational settings using this console, whereas VMM delegated administrators can manage only the VMs that have been delegated to them.

A.
True

B.
False



Answer: A


QUESTION 26
You work as the network administrator at ESL, Ltd. You create the snapshots which are show in the following table on a virtual machine.




Base on the conditions, you are required to implement the version of the contains the base OS install, the File Services server role, and the Window deployment Services role to the new virtual machine.

A.
You need to apply Snapd and delete all snapshots.

B.
You need to apply SnapA, SnapB, and SnapD and delete SnapD.

C.
You need to apply SnapB, and SnapD and delete SnapA,.SnapC.

D.
You need to apply SnapA, SnapB, and SnapC, and then revert to SnapD



Answer: A


QUESTION 27
You work as the network administrator at ESL, Ltd. The company's network contains of a server named Server1. Server1 runs window server 2008 and has installed the Hyper-V server role. The following table shows the configuration of server1:




Currently, you erase a lot of data from VM1. Now you need to reduce the size of vm1. vhd without altering the existing data on the virtual disk or the operation of other virtual machines on the host server.

A.
You need to merge vm1.vhd.

B.
You need to compact vm1.vhd.

C.
You need to run a defragmentation of the local volumes on VM1.

D.
You need to run a defragmentation of the local volumes on Server1.



Answer: B


QUESTION 28
To deploy VMM 2008, which of the following software are required to be installed before installing the VMM server component?

A.
Windows Server 2008 x64

B.
Windows PowerShell 1.0

C.
Windows Remote Management (WinRM

D.
Microsoft Net Framework 3.0E. Windows Automated Installation Kit (Windows AIK) 1.1



Answer: ABCD


QUESTION 29
You work as the network administrator at ESL, Ltd. You manage a virtual machine named VM1 which is configured as show in the following table.




Base on the conditions, you need to install an application on VM1 that requires a dedicated 100 GB volume. Then what action should you perform to achieve the goal?

A.
You need to edit disk 1.

B.
You need to expand disk 1.

C.
You need to expand disk 2.

D.
You need to compact disk 2.



Answer: C


QUESTION 30
You work as the network administrator at ESL, Ltd. The company's network contains of a virtual machine named Server 1. Server 1 has installed the Hyper-v server role and is hosted on a server that runs Windows Server 2008. The following exhibit shows the current virtual machine setting for server1:




You try to add a new DVD drive to integrated development environment (IDE) controller 0 and following error message: ��Error Applying DVD Drive ChangesFailed to add device 'Microsoft synthetic DVD Drive' .�� In such case, you need to add the DVD drive without disrupting the current functionality. Then what action should you perfirm to achive the goal?

A.
You need to add a new SCSI controller.

B.
You need to move Server 1_B. vhd to IDE controller 1.

C.
You need to remove Server1. vhd from IDE controller 0.

D.
You need to add the DVD drive to Location 1 on IDE controller 1.



Answer: D


QUESTION 31
You work as the network administrator at ESL, Ltd. You manage a Server 2008, and server has the Hyper-v server installed. Also the server has a single on-board network card and is configured as show in the following table.




Currently, the server hosts four virtual machines that are connected to the external network. And you install a new network card on the server. In such case, you must ensure that all the virtual machines use only the new network card and can connect to other computers on the network. So what should you modify?

A.
The internal virtual network

B.
The private virtual network

C.
The external virtual network

D.
The bindings of the on-board network card



Answer: C


QUESTION 32
You work as the network administrator at ESL, Ltd. The company's network consists of two servers named Server 1 and Server 2. Both of them run windows Server 2008 and have installed the Hyper-V server role. Currently, you create a virtual machine that runs Windows Server 2008 on both servers. Each virtual machine hosts a copy of your company's internal website and the virtual machines are stored on local physical drives. Base on the conditions, you are required to ensure that the internal Website is available if either the single host server or the virtual machine fails. Then what should you configure to achieve the goal?

A.
Failover Clustering on Server 1 and Server 2

B.
Failover Clustering on the virtual machines

C.
Network Load Balancing on the virtual machines

D.
Network Load Balancing on Server 1 and Server 2



Answer: C


QUESTION 33
You work as the network administrator at ESL, Ltd. The company's network consists of three servers that run windows Server 2008. All of the have installed the Hyper-V server role and Failover Clustering feature and all have a single hard disk and three network adapters. Currently, you configure a storage device that supports iSCSI connections. One of the network adapters on each server is dedicated to connect to the
iSCSI device. Base on the conditions, you need to implement highly available virtual machines on the failover cluster to meet the following requirements:
Must use the least number of network adapters required on each host server. The virtual machines must be able to communicate with other computers on the network. Then what action should you perform to achieve the goal?

A.
You need to configure one external network in Hyper-V Manager on each host server.

B.
You need to configure one internal network in Hyper-V Manager on each host server.

C.
You need to add an additional network adapter to each host server. Configure two external networks in Hyper-V Manager.

D.
You need to add an additional network adapter to each host server. Configure one external network and one internal network in Hyper-V Manager.



Answer: A


QUESTION 34
You work as the network administrator at ESL, Ltd. You manage a virtual machine named VM1, and runs Windows Server 2008. You create the snapshots shown in the following table:




Base on the above conditions, you need to restore the server to May 1, 2008, 00:00. You must to achieve this goal without incurring any unnecessary downtime. Then what should you do from Hyper-V Manager.

A.
You should apply CP1

B.
You should click Import Virtual Machine.

C.
You should apply CP3, CP2, and then CP1

D.
You should right-click on VM1 and then click Revert.



Answer: A


QUESTION 35
You work as the network administrator at ESL, Ltd. The company's network consists of a server that runs Microsoft System Center Virtual Machine Manager
(SCVMM) 2008 and then server that run Windows Server 2008 that have installed the Hyper-V server role. Currently, you are required to move a virtual machine to other host server. So you must move the virtual machine to the destination host that has the most available system resources. The destination host must be automatically selected by System Center Virtual Machine Manager??? ��-SCVMM?? Then what action should you perform to achieve the goal?

A.
You need to use the Clone virtual machine action.

B.
You need to use the Export option in Hyper-V Manager.

C.
You need to drag and drop the virtual machine on a new host.

D.
You need to drag and drop the virtual machine on the All Host group.



Answer: D


QUESTION 36
You work as the network administrator at ESL, Ltd. The company's network consists of two servers named Server 1 and Server 2. Both server run Windows Server 2008 and have installed the Hyper-V server role and the Failover Clustering feature. Currently, you configure a virtual machine on server 1 and plan to use Failover clustering to make the virtual machine highly available. Now, you required to implement a storage configuration solution to support the highly available virtual machine. Then what action should you perform to achieve the goal?

A.
You need to add a hard disk to Server 1 and Server 2.

B.
You need to configure a virtual disk for virtual machine.

C.
You need to configure iSCSI shared storage on Server 1 and Server 2.

D.
You need to add a network adapter to the virtual machine. Configure the network to connect to an iSCSI drive.



Answer: C


QUESTION 37
You work as the network administrator at ESL, Ltd. You manage a virtual machine named VM1. VM1 runs Windows Server 2008 and has one dynamically expending virtual disk named VM1. vhd. Currently, you create a snapshot of VM1 named Snap 1 and install an application on Vm1 named App 1. Base on the above conditions, you are required to ensure that all newly-created virtual machines that use VM1. vhd as their parent disk have App 1 installed.

A.
You need to select VM1 and then click Reset.

B.
You need to select VM1 and then click Revert.

C.
You need to select Snap 1 and then click Apply.

D.
You need to select Snap 1 and then click Delete.



Answer: D


QUESTION 38
You work as the network administrator at ESL, Ltd. You manage a server run Windows Server 2008 and you have installed the Hyper-V server role on the server. And you create a new virtual machine that has the following configurations:




Base on the provided conditions, you try to install Windows Server 2003 on the virtual machine and receive the error message shown in the exhibit.




Now, you must ensure that you can install Windows Server 2003 on the virtual machine. Then what action should you perform to achieve the goal?

A.
You need to run the New Virtual Hard Disk Wizard.

B.
You need to connect the VHD to IDE controller 0 on location 0.

C.
You need to change the location of the DVD drive to location 1.

D.
You need to restart the installation of Windows Server 2003 and specify additional mass storage drivers when prompted.



Answer: B


QUESTION 39
You work as the network administrator at ESL, Ltd. The company assigns you a server that runs Windows Server 2008. The server has the following software installed: Default installation of the Web Server (IIS) server role; Microsoft System Center Virtual Machine Manager (SCVMM) 2008 server components. Currently, you attempt to start the Virtual machine Manager (VMM) Self-Service Portal installation but receive an installation error message. Now, you must ensure that you can install the VMM Self-Service Portal. Then what action should you perform to achieve the goal?

A.
You need to install a web server certificate.

B.
You need to install additional Web Server (IIS) server role service.

C.
You need to enable Windows Authentication in Microsoft Internal Information Service.

D.
You need to configure the .NET trust level in Microsoft Internal Information Service to medium.



Answer: B


QUESTION 40
You work as the network administrator at ESL, Ltd. You manage a Virtual Hard Disk (VHD) named base. Vhd that consists of a server named Server1 which has a full installation of Windows Server 2008.Currently, the company requires you to create ten more virtual machines that need to be configured to have the same operating system as Server1. The solution must minimize the initial amount of disk space used by the host server and must ensure that all virtual machines can run simultaneously. Then what action should you perform to achieve the goal?

A.
You need to create 10 copies of the base . Vhd file. Create 10 virtual machines. Assign a copy of base. vhd as the first hard disk for each virtual machine.

B.
You need to create 10 fixed -size VHDs. Create 10 virtual machines. For each virtual machine, assign base. vhd as the first hard disk and assign the fixed-size VHD as the Second hard disk.

C.
You need to create 10 differencing VHDs. Specify base. vhd as the parent disk. Create 10 virtual machines and assign a differencing disk as the first hard disk for each virtual machine.

D.
You need to create 10 dynamically expanding VHDs. Create 10 virtual machines. For each virtual, assign base. vhd as the first hard disk and assign the dynamically expanding disk as the second hard disk.



Answer: C


QUESTION 41
You work as the network administrator at ESL, Ltd. The company's network consists of a server that runs Microsoft System Center Virtual Machines Manager (SCVMM) 2008. Base on the rapid development of the company, you are required to deploy 25 virtual machines that have various operating systems. And you need to ensure that the network configurations are identical on all the virtual machines. What action should you perform first?

A.
You need to create a new template.

B.
You need to create a new guest OS profile.

C.
You need to create a new hardware profile

D.
You need to create a new virtual machine and add it to a library share.



Answer: C


QUESTION 42
You work as the network administrator at ESL, Ltd. You manage a server named Server1. Server1 run windows Server 2008 and has installed the Hyper-V server role. The following table shows the physical disk of the Server1:




Currently, You create a new virtual machine that you plan to use as a file server, and you must ensure that the new virtual machine can store up to the three terabytes of uncompressed data. The solution must minimize disk space utilization.

A.
fixed

B.
pass through

C.
differencing

D.
dynamically expanding



Answer: B


QUESTION 43
You work as the network administrator at ESL, Ltd. The company's network consists of three server named Server1, Server2, Server3. The following table shows the configuration relevant portion of the network:




You configure Server1 and Server2 as host in Virtual Machine Manager (VMM) on Server3. Now, you are required to move VM4 from Server1 to Server2,and your solution must meet the following requirements: Downtime of VM4 must be minimized; Administrative effort minimized ; Virtual machine configuration must remain the same. Then what action should you perform to achieve the goal?

A.
Drag and drop VM4 from Server1 to Server2 from VMM.

B.
Select the Import action from Hyper-V Manager on Server2.

C.
Select VM4 and then select the Move to host group action from Vmm.

D.
Shut down VM4 and run the Export action from Hyper -V Manager on Server1. Select the Import action from Hyper-V Manager on Server2.



Answer: A


QUESTION 44
You work as the network administrator at ESL, Ltd. You are required to create a virtual machine with the following disk configuration:




You must minimize the number of the disk controllers. Then which disk controller configuration should you use?

A.
two IDE controllers

B.
one SCSI controller

C.
one SCSI controller and one IDE controller

D.
one SCSI controller and two IDE controllers



Answer: C


QUESTION 45
You work as the network administrator at ESL, Ltd. The company's network consists of two server named Server1 and Server2. Both Servers run Windows Serer 2008, and have installed the Hyper-V server role on the Server1 and Windows Deployment Services role on server2. Currently, you create a new virtual machine and connect the network adapter to an external virtual network. You attempt to start the virtual machine but receive the following error message: ��Boot failure. Reboot and select proper Boot device or Insert Boot Media in selected Boot device.�� You must find a solution to ensure that the virtual machine can start by using Pre-boot Execution Environment (PXE). Then what action should you perform to achieve the goal?

A.
You need to connect a virtual PXE disk and start the virtual machine.

B.
You need to add a legacy network adapter to the virtual machine and restart the virtual machine.

C.
You need to bind the Microsoft Virtual Network Switch Protocol to the external network adapter on Server1.

D.
You need to connect the network adapter to a virtual network that has a private connection type and restart the virtual machine.



Answer: B


QUESTION 46
You work as the network administrator at ESL, Ltd. You create a virtual machine named VM1 that runs Windows Server 2008. Now, you are required to create new virtual machine that will use VM1s virtual disk as their parent disk. To meet the requirement, you must ensure that the new virtual machines automatically run the Mini-Setup Wizard the first time they start. Which command should you run?

A.
winrm quickconfig

B.
Shutdown /m\\VM1 /s /t 10

C.
Winnt32 /unattend:unattend.xml

D.
Sysprep /quiet /generalize /oobe /shutdown



Answer: D


QUESTION 47
You work as the network administrator at ESL, Ltd. The following table shows the configuration of your network.




You deploy Microsoft System Center Virtual Machine Manager (SCVMM) 2008.Base on the above conditions, you need to add an additional library server. So which two possible servers should you choose?

A.
ServerA

B.
ServerB

C.
ServerC

D.
ServerD



Answer: CD


QUESTION 48
You work as the network administrator at ESL, Ltd. The company's network consists of two servers named Server1 and Server2. Both servers run Windows Server
2008. You have installed the Hyper-V server role on Server1 and the Windows Deployment Services role on Server2. Currently, you have a virtual machine named VM1 that has a full installation of Windows Server 2008. VM1 uses a single Virtual Hard Disk (VHD) named VM1.vhd. You prepare VM1 for imaging .Now, you are required to place an image of VM1 on Server2 so that it can be deployed to both physical and virtual host by using Windows Deployment Services. Then which two actions should you perform to achieve the goal?

A.
You need to configure VM1 to use a legacy network adapter

B.
You need to restart VM1 by using a Windows Deployment Services capture image

C.
You need to restart VM1 by using a Windows Deployment Services discover image

D.
You need to export VM1 and specify \\server2\D$\RemoteInstall\images as the destination



Answer: AB


QUESTION 49
You work as the network administrator at ESL, Ltd. The company's network consists of a server that runs Microsoft Virtual Server 2005 and host twenty virtual machines and all virtual machines run Windows Server 2003. Currently, you deploy a server named Server5 that runs Windows Server 2008. Server5 has installed the Hyper-V server role. Now, you must find a solution to migrate the virtual machines from the virtual server host to Server5, and your solution must meet the following requirements after the migration: Allow the addition of SCSI controllers to the virtual machine; Allow the Hyper-V Virtual Machine Management service to shut down the operating system Then what should you do before you migrate the virtual machines to Server5?

A.
You should remove the Virtual Machine Additions.

B.
You should the change the Hardware Abstraction Layer (HAL).

C.
You should install Windows Server 2003 Service Pack 2 (SP2).

D.
You should run the setup program for the Hyper-V Integration Components.



Answer: A


QUESTION 50
You are the new ESL Trainee. The company's network administrator instructs you to create recommendations for server consolidation. You are required to provide the following information to the network administrator:
Performance monitoring data; An inventory of servers that support virtualization. Then which action should you perform first?

A.
You need to run Hyper-V Manager

B.
You need to install Microsoft System Center Operations (SCOM) 2007.

C.
You need to install Microsoft Assessment and Planning Solution Accelerator.

D.
You need to install Microsoft System Center Virtual Machine Manager (SCVMM) 2008.



Answer: C


QUESTION 51
You work as the network administrator at ESL, Ltd. You are maintaining several virtual machines by using Microsoft System Center Virtual Machine Manager (SCVMM) 2008. Currently, you plan to install an application on the virtual machine from ISO file which need be placed in a shared network location. Base on the condition, you must ensure that you can mount the ISO file by using Virtual Machine Manager (VMM).
Then what action should you perform to achieve the goal?

A.
You need to burn the ISO file to a DVD.

B.
You need to add the ISO file to the SCVMM library.

C.
You need to renamed the ISO file to have an .img extension.

D.
You need to extract the ISO file to a folder on the host machine.



Answer: B


QUESTION 52
You work as the network administrator at ESL, Ltd. The company's network consists of a server named Server1. Server1 runs Windows Server 2008 and has installed the Hyper-V server role. Server1 has two network cards as shown in the following table.




Currently, to response the raid development of the company . You need to create ten more virtual machine. And you need to configure the network settings on Server1 to support the following requirements: Allow all the virtual machine network access to Server1; Deny all the virtual machine access to other network computers ; Allows all the virtual machines network access to all the other virtual machines running on Server1. Then action should you perform to achieve the goal?

A.
You should create a private virtual network.

B.
You should create an internal virtual network.

C.
You should create an external virtual network that is attached to NIC2.

D.
You should create an external virtual network that is attached to NIC1 and Microsoft Virtual Network Switch Protocol.



Answer: B


QUESTION 53
You work as the network administrator at ESL, Ltd. The company's network consists of a server named Server that runs Windows Server 2008. The Server has installed the Hyper-V server role and two network adapters. Base on the condition, you are required to deploy virtual machines on the server to meet the following requirements: All virtual machines must communicate with other computers on the network; All virtual machines must store data on a storage device that is accessible through iSCSI; All iSCSI network communications must use a dedicated network connection.
Then what should you configure in Hyper-V?

A.
Two private networks

B.
Two external networks

C.
Two internal networks

D.
One external network and one private network



Answer: B


QUESTION 54
You work as the network administrator at ESL, Ltd. The Company's network consists of two servers named Server1 and Server2. The following table shows the configuration of the servers:



Base on the conditions, you must find a solution to ensure that you can run VM3 on Server2 and your solution must meet the following requirements: VM3 must remain available on Server1; Administrative effort must be minimized; Virtual machine configurations must remain the same.
Then which two actions should you perform to meet the requirements?

A.
Copy the VM3 Virtual Hard Disk (VHD) files to Server2.

B.
Run the Export action for VM3 from Hyper-V Manager on Server1.

C.
Select the Import action for VM3 from Hyper-V Manager on Server2.

D.
Copy the VM3 XML configuration files to Server2. Double-click the XML configuration file.



Answer: BC


QUESTION 55
You work as the network administrator at ESL, Ltd. The company's network consists of a server that runs Windows Server 2008, and the server has the Hyper-V server role installed. Now you are required to ensure that a user named User1 can remotely connect to the Hyper-V server by using Hyper-V Manager.
Then what should you modify?

A.
The Role Definitions in Authorization Manager

B.
The Role Assignments in Authorization Manager

C.
The members of the local Server Operators group

D.
The NTFS permissions of the InitailStore.xml file



Answer: B


QUESTION 56
You work as the network administrator at ESL, Ltd. You manage a server that runs Windows Server 2008. The server has the Hyper-V server role installed and the following configurations:




Currently, you discover that slow response times when use Hyper-V Manger to establish remote connections to the Hyper-V server. So you need to improve response time when administrators use Hyper-V Manager. Then what action should you perform to achieve the gaol?

A.
You should increase the RAM.

B.
You should add a second network processor.

C.
You should add a second network card.

D.
You should change the SATA drive to iSCSI drive.



Answer: C


QUESTION 57
You work as the network administrator at ESL, Ltd. You mange a server that has a Server Core installation of Window Server 2008 and server has the Hyper-V server role installed. Now you must ensure that you can launch Hyper-V Manager from a client computer that runs Windows Vista Server Pack 1 (SP1) for x64-based systems and connect to the server. So which command should you run on the server?

A.
ocsetup Microsoft-Hyper-V

B.
cscript SCregEdit.wsf /AR 0

C.
oclist | findstr /I Microsoft-Hyper-V

D.
Netsh advfirewall set rule group=remote administration new enable=yes



Answer: D


QUESTION 58
You work as the network administrator at ESL, Ltd. You manage five servers that run Window Server 2008. All servers have the Hyper-V server role installed.
Now you are required to manage the virtual machine settings from a client computer that runs Window XP Server Pack 2 (SP2).
So what action should you perform first?

A.
You need to enable Remote Desktop on the servers.

B.
You need to run the installation of the Remote Server Administration Tool (RSAT) update on the servers.

C.
You need to run the installation of the Remote Server Administration Tools (RSAT) update on the computer.

D.
You need to upgrade the client computer to Windows XP Service Pack 3 (SP3) and install adminpak.msi.



Answer: A


QUESTION 59
You work as the network administrator at ESL, Ltd. You manage a server that runs Window 2008 and the server has the Hyper-V server role installed Current, all users and computers on your network are members of a single Active Directory Domain Service (AD DS) domain.
The company requires you to provide a non-administrative user named User 1 permissions to remotely connect to the server by using Hyper-V Manager.
Then what action should you perform to achieve the goal?

A.
You need to modify the permissions of the Hyper-V registry key.

B.
You need to update the authorization store by using Authorization Manager.

C.
You need to modify the permissions of the default virtual machines folder

D.
You need to add User 1 to the Network Configuration Operators group on Server 1.



Answer: B


QUESTION 60
You work as the network administrator at ESL.com. The company assigns you a server which runs Windows Server 2008. The server is a member of a workgroup and has installed the following components:

(1) Web Server (IIS) server role
(2) IIS 6 WMI Compatibility role service
(3) IIS 6 Metabase Compatibility role service
(4) Microsoft SQL Server 2005 Express Edition Service Pack (SP2)

Base on the conditions, you try to install Microsoft System Center Virtual Machine Manager (SCVMM) 2008 on the server, but the installation fails. In such case, you must ensure that you can install SCVMM on the server. So what action should you perform?

A.
You need to disable User Account Control (UAC) on the server

B.
You need to remove the IIS 6 Metabase Compatibility role service

C.
You need to replace SQL Server 2005 Express Edition with a different edition

D.
You need to join the Windows Server 2008 server to an Active Directory domain



Answer: D