Topic: Cisco 200-301 topic 1 question 322
Refer to the exhibit. Which switch becomes the root of a spanning tree for VLAN 10 if the primary switch fails and all links are of equal speed?
A.
SW1
B.
SW2
C.
SW3
D.
SW4
Re: Cisco 200-301 topic 1 question 322
Switch 2 is primary. But in this context, that is to say when it fails, the primary is chosen between SW1, SW3 and SW4. Thus, SW3 becomes the root.
Answer C is correct.
Re: Cisco 200-301 topic 1 question 322
we need an admin here to check this bellabop, ruining answers for all users.
Re: Cisco 200-301 topic 1 question 322
Let us report it
Re: Cisco 200-301 topic 1 question 322
The answer is correct. Which one after the first one.
Re: Cisco 200-301 topic 1 question 322
@ Bellabop please desist from confusing people. We hear to learn.
Re: Cisco 200-301 topic 1 question 322
C is correct answer
Re: Cisco 200-301 topic 1 question 322
C is perfect after I carefully read the question
Re: Cisco 200-301 topic 1 question 322
C is correct.
SW2 is the primary Switch, so SW3 is the Backup.
Re: Cisco 200-301 topic 1 question 322
The wording for this question is important (if the primary switch fails).
The bridge priority takes precedence over the MAC address.
Switch 2 is the primary switch (it has the lowest number bridge priority).
Switch 3 would be the backup (it has the second lowest number bridge priority).
Answer is C.
Re: Cisco 200-301 topic 1 question 322
It´s C
Re: Cisco 200-301 topic 1 question 322
c as in cock
Re: Cisco 200-301 topic 1 question 322
C as in cuck
Re: Cisco 200-301 topic 1 question 322
It's C. The bridge priority takes precedence over the MAC address. It's only used as a tie-breaker in the case that priorities are equal.
This should not be so contentious.
Re: Cisco 200-301 topic 1 question 322
Answer is correct
Re: Cisco 200-301 topic 1 question 322
Lowest priority after the primary (SW2) is SW3
Re: Cisco 200-301 topic 1 question 322
Correct
Re: Cisco 200-301 topic 1 question 322
C is correct
Re: Cisco 200-301 topic 1 question 322
get full questions [email protected]
Re: Cisco 200-301 topic 1 question 322
To answer this question, we first have to identify which switch is the root of the network, based on the information in the image, the switch with the smallest BRID becomes the root, in this case SW2, since it is the root at the moment If it fails, there will be a new election following the same criteria, so SW3 becomes the root of the network.
The correct answer is C, SW3.
Re: Cisco 200-301 topic 1 question 322
Switch 3 make sure to read these questions carefully guys
Re: Cisco 200-301 topic 1 question 322
the correct answer is C for sure