300-410 topic 1 question 570

SIMULATION
-

Guidelines
-

This is a lab item in which tasks will be performed on virtual devices.

•    Refer to the Tasks tab to view the tasks for this lab item.
•    Refer to the Topology tab to access the device console(s) and perform the tasks.
•    Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
•    All necessary preconfigurations have been applied.
•    Do not change the enable password or hostname for any device.
•    Save your configurations to NVRAM before moving to the next item.
•    Click Next at the bottom of the screen to submit this lab and move to the next question.
•    When Next is clicked, the lab closes and cannot be reopened.

Topology
-

Tasks
-

Troubleshoot and resolve the issues to achieve these goals:

1. Ensure that R1 reaches the prefix 10.6.66.6 without any single point of failure in the path. Do not use a static route or policy-based routing to accomplish this.
2. Ensure that R1 loopback 1 reaches to R6’s loopback 1 by following the path through R1, R3, R5 to R6 and vice versa. Use metric values K1 = 100000, K2=1, K3=255, K4=10, K5=1500 to modify the default metric in EIGRP if required. Do not use a route-map.
3. Ensure that on R3, prefix 10.0.56.6/32 uses the SP1 to route to the Internet, whereas prefix 172.16.12.2/32 uses the SP2 to route to the Internet. Do not use BGP to accomplish this. Use the pre-configured route-maps SP1 and SP2 and modify to accomplish the task if required. Use the ping and trace commands from R6 and R2 to prefixes 209.165.202.132 and 209.165.202.128, respectively to verify the results.